Home / All / Auto Compressors / Kia compressor /

10PA15C ac COMPRESSOR 2004-2006 KIA CERATO 1.6 4PK 125MM 97701-2F000 12040-22700 977012F000 1204022700 air conditioning comp

Categories

10PA15C ac COMPRESSOR 2004-2006 KIA CERATO 1.6 4PK 125MM 97701-2F000 12040-22700 977012F000 1204022700 air conditioning comp

10PA15C ac COMPRESSOR 2004-2006 KIA CERATO 1.6 4PK 125MM 97701-2F000 12040-22700 977012F000 1204022700 air conditioning comp
CategoriesKia compressor
BrandINTL Auto Air Conditioning Compressor
ModelINTL-0107
SizePACKING : 25*25*20
TypeCompressor
Car Make10PA15C KIA CERATO 4pk 2004-2006 1.6
OE NO.97701-2F000 12040-22700 977012F000 1204022700
QUALITYGRADE ONE
Unit PriceUS $ 60-130 / set
Download DOCpdf icon
Update TimeApr 27,2024
Detail Information

 

Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee. 

 

10PA15C KIA CERATO 4pk 2004-2006 1.6 ac compressor

 


 10PA15C ac COMPRESSOR 2004-2006 KIA CERATO 1.6 4PK 125MM 97701-2F000 12040-22700 977012F000 1204022700 air conditioning comp10PA15C ac COMPRESSOR 2004-2006 KIA CERATO 1.6 4PK 125MM 97701-2F000 12040-22700 977012F000 1204022700 air conditioning comp

 

 

 

Specification:

 

Model number: INTL-0107 

Car name: Kia 2004-2006 

Compressor type: 10PA15C 

Pulley: 4PK 

Clutch DIA: 125mm 

Volt: 12V   

 

Special Notes:

 

OEM# 

 

97701-2F000 

12040-22700  

977012F000 

1204022700 

 

 

Details 

 

2004-2006 KIA CERATO 1.6 COMPRESSOR 10PA15C 4PK 125MM

 

 

10PA15C ac COMPRESSOR 2004-2006 KIA CERATO 1.6 4PK 125MM 97701-2F000 12040-22700 977012F000 1204022700 air conditioning comp

 

 

 

Basic Requirements when servicing an A/C system:

 

 

 

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well 

 

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

 

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective. 

 

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

 

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

 

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced

Please send your message to us
*Email
*Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.