Home / All / Hose Assemblies /

2S6H19A704AD 2S6H19A704AE 2S6H19A704AG air conditioning ac Tube/Hose Assemblies & line pipe/pipes for Ford Fiesta/Fusion

Categories

2S6H19A704AD 2S6H19A704AE 2S6H19A704AG air conditioning ac Tube/Hose Assemblies & line pipe/pipes for Ford Fiesta/Fusion

2S6H19A704AD 2S6H19A704AE 2S6H19A704AG air conditioning ac Tube/Hose Assemblies & line pipe/pipes for Ford Fiesta/Fusion
CategoriesHose Assemblies
BrandINTL Auto Air Conditioning Compressor
ModelINTL-MH089
Sizeall
TypeHOSE
Car MakeFord Fiesta/Fusion
OE NO.2S6H19A704AB 2S6H19A704AC 2S6H19A704AF
QUALITYoriginal GOODYEAR
FOB portGuangzhou
Terms of PaymentL/C, T/T, Western Union, paypal
Download DOCpdf icon
Update TimeMar 29,2024
Detail Information

INTL-MH089INTL-MH089

We can offer all car's ac air conditioning hose ( Ac Suction hose, Liquid line and Discharge hose assy ), promise these Hose are original Goodyear brand, High quality.



Ac air conditioning tube and hose assembly for Ford Fiesta/Fusion




     


 

Specification:

Model No.: INTL-MH089

OEM:

2S6H19A704AD
2S6H19A704AE
2S6H19A704AG
2S6H19A704AB
2S6H19A704AC
2S6H19A704AF
1 150 897
1 361 398
1 142 291
1 303 118
1 140 667

1 321 471



Used for:

 

for FORD FIESTA V (JH_, JD_) (2001/11 - /)
for FORD FUSION (JU_) (2002/08 - /)
for FORD FIESTA Van (2003/10 - /)

 

Package: 1 pcs per one bag 



Kindly remind for Automotive ac hose:

1, Types of Refrigerant Lines:

The major components of an air conditioning system all have an inlet and outlet connection. It's the refrigerant lines that connect these parts together allowing them to function as one. O-ring seals are provided at the various connections providing a tight seal while allowing for some flexibility to absorb vibration and movement. This design also facilitates the replacement of individual pieces.

All automotive AC will have at least three major refrigerant lines. These include the suction hose, liquid line and the discharge. The suction hoses are located between the outlet side of the AC evaporator and the inlet side of the compressor. It's referred to as the suction side because this is where the compressor uses vacuum to pull in refrigerant. These are low pressure hoses that should be cool to the touch when operating and larger in diameter than the others found throughout the system.

2, High Pressure Tubing

The discharge line connects from the outlet of the compressor and runs to the inlet of the AC condenser located out in front of the radiator. This can cover a lot of ground on some automobiles and therefore is often the longest. The liquid line connects the condenser outlet to the receiver drier also known as the accumulator on some applications. This is the only line that is carrying Freon in the liquid state hence its nickname.

Discharge and liquid lines are always very warm to the touch and easily distinguishable from the much larger diameter suction line. Both of these high pressure hoses are made up mostly of aluminum tubing but can contain small sections of rubber hose to allow for flexibility and safe routing in the engine compartment. Any rubber hose utilized in an air conditioning system is specially manufactured to carry refrigerant. Vehicles that use the R134A type of Freon have an additional layer of rubber that serves as a barrier to prevent the refrigerant from escaping through the pores of the hose.



Please send your message to us
*Email
*Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.