Home > Auto Compressors > sanden 7 series compressor >

AUTO air conditioning ac compressor PV8 pulley 24V kompressor SANDEN SD709 SD-709 7H15 SD7H15 universal used

Categories

AUTO air conditioning ac compressor PV8 pulley 24V kompressor SANDEN SD709 SD-709 7H15 SD7H15 universal used

AUTO air conditioning ac compressor PV8 pulley 24V kompressor SANDEN SD709 SD-709 7H15 SD7H15 universal used
AUTO air conditioning ac compressor PV8 pulley 24V kompressor SANDEN SD709 SD-709 7H15 SD7H15 universal usedAUTO air conditioning ac compressor PV8 pulley 24V kompressor SANDEN SD709 SD-709 7H15 SD7H15 universal used
Categoriessanden 7 series compressor
BrandINTL Auto Air Conditioning Compressor
ModelINTL-C129
SizePACKING : 25*22*19
TypeCompressor
Car Make7h15 universal
OE NO.SANDEN SD709 7H15 SD-709 SD7H15
QUALITYGRADE ONE
FOB porthuangpu
Terms of PaymentL/C,Western Union,MoneyGram,T/T,paypal
Download DOC
Update Time09-21-2017
Detail Information

Download the description details at PDF:INTL-C129INTL-C129



SD7H15 AC COMPRESSOR Universal Superior quality Kompressor direct mount   



Specification:

Model number: INTL-C129

Car name: Universal

Compressor Type: 7H15

Clutch:8PK

Volt: 24V




OEM#

SANDEN

SD709

7H15

SD-709

SD7H15







Packaging Detail


0002307011 0002302011 DENSO 7SB16C ac compressor for Benz MB Sprinter GM ZAFIRA Chrysler Crossfire Dodge Sprinter Van


Shipping Detail


0002307011 0002302011 DENSO 7SB16C ac compressor for Benz MB Sprinter GM ZAFIRA Chrysler Crossfire Dodge Sprinter Van


Our Factory


0002307011 0002302011 DENSO 7SB16C ac compressor for Benz MB Sprinter GM ZAFIRA Chrysler Crossfire Dodge Sprinter Van


Basic Requirements when servicing an A/C system:

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced



Please send your message to us
*We will reply your inquiry to this Email as soon as we see it
E-mail
 
/
Title
Content

Agree to use terms of service