ac (a/c) compressor  

for New Holland/  

" />
Home > Auto Compressors > John Deere compressor >

DENSO 10P15 A/C air con COMPRESSOR Pump with 24V for Valtra T-180/JOHN DEERE /New Holland

Categories

DENSO 10P15 A/C air con COMPRESSOR Pump with 24V for Valtra T-180/JOHN DEERE /New Holland

DENSO 10P15 A/C air con COMPRESSOR Pump with 24V for Valtra T-180/JOHN DEERE /New Holland
DENSO 10P15 A/C air con COMPRESSOR Pump with 24V for Valtra T-180/JOHN DEERE /New HollandDENSO 10P15 A/C air con COMPRESSOR Pump with 24V for Valtra T-180/JOHN DEERE /New HollandDENSO 10P15 A/C air con COMPRESSOR Pump with 24V for Valtra T-180/JOHN DEERE /New HollandDENSO 10P15 A/C air con COMPRESSOR Pump with 24V for Valtra T-180/JOHN DEERE /New Holland
CategoriesJohn Deere compressor
BrandINTL Auto Air Conditioning Compressor
ModelINTL-XZC731
Size25X25X20cm
TypeCompressor
Car Makefor Trator CNH
OE NO.965399394 96235
usefor Valtra T-180/JOHN DEERE /New Holland / Valtra T-180
Compressor TypeDENSO 10P15 10P15C
GROOVE:PV8
Volt:24V
Clutch Diameter130MM
FOB porthuangpu
Terms of PaymentL/C,Western Union,MoneyGram,T/T,paypal
Download DOC
Update Time09-19-2017
Detail Information


Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee.

DENSO 10P15 10P15C Trator CNH / Case / New Holland / Valtra T-180 ac compressor


Specification:

Model number: INTL-XZC731

Car name: Trator CNH / Case / New Holland / Valtra T-180

Type: DENSO 10P15 10P15C

Pulley: 8PK

Volt: 12V/24V

Details

 


Contact.jpg



Packing :

Factory & office

Basic Requirements when servicing an A/C system:

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced

Please send your message to us
*We will reply your inquiry to this Email as soon as we see it
E-mail
 
/
Title
Content

Agree to use terms of service