Home / All / Auto Compressors / Chrysler compressor /

PV4 China factory auto compressor air con ac compressor 10S17C for Chrysler PT Cruiser 2.4L 2004-2009 5058031AC 447220-3861

Categories

PV4 China factory auto compressor air con ac compressor 10S17C for Chrysler PT Cruiser 2.4L 2004-2009 5058031AC 447220-3861

PV4 China factory auto compressor air con ac compressor 10S17C for Chrysler PT Cruiser 2.4L 2004-2009 5058031AC 447220-3861
CategoriesChrysler compressor
BrandINTL Auto Air Conditioning Compressor
ModelINTL-XZC359M
Size28*25*20CM
TypeCompressor, Denso 10S17C
Car Makefor Chrysler PT Cruiser 2.4L
OE NO.denso 447220-3861 5058031AC
Clutch diameter130 mm
ClutchPV4
Volt12 V
ManufacturerDenso
for Chrysler number5058031AC 5278558AA 5264760AB 5058033AB 5058031AB 5058036AC 5278757AA
Unit PriceUS $ 80-90 / set
FOB portHuangpu
Terms of PaymentL/C, D/A, D/P, T/T, Western Union, MoneyGram, paypal
Download DOCpdf icon
Update TimeApr 26,2024
Detail Information

INTL-XZC359MINTL-XZC359M          



PV4 auto air con ac compressor 10S17C for Chrysler PT Cruiser 2.4L 2004-2009 5058031AC 447220-3861


Details:

MODEL NO.INTL-XZC359M
compressor TYPEDENSO 10S17C        
Pulley/Volt4PK/12V
car fitFor Chrysler PT Cruiser                 




Part OEM:

Denso

447220-3861

5058031AC

5278558AA

5264760AB

5058033AB

5058031AB

5058036AC

5278757AA

5058031AC

5058031AD

5058036AC

RL058036AD





Auto make :

for CHRYSLER

2001-2007 PT CRUISER AUT.


for DODGE

2000-2002 NEON 2.0L

2004 SRT-4 2.4L


Packaging Detail

Shipping Detail

Our Factory

Basic Requirements when servicing an A/C system:


1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well


2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.


3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.


4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.


5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.


6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced






Please send your message to us
*Email
*Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.