Home / All / Auto Compressors / Ford compressor /

3E-1906 101-1759 3E1906 1011759 SANDEN: 4604 U4604 8064 4656 4468 7984 SANDEN 7H15 SD7H15 SD7H15HD auto aircon ac compressor

Categories

3E-1906 101-1759 3E1906 1011759 SANDEN: 4604 U4604 8064 4656 4468 7984 SANDEN 7H15 SD7H15 SD7H15HD auto aircon ac compressor

3E-1906 101-1759 3E1906 1011759 SANDEN: 4604 U4604 8064 4656 4468 7984 SANDEN 7H15 SD7H15 SD7H15HD auto aircon ac compressor
CategoriesFord compressor
BrandINTL Auto Air Conditioning Compressor
ModelINTL-C142A
SizePACKING : 25*22*19
TypeCompressor
Car MakeSANDEN 7H15 SD7H15 SD7H15HD for Caterpillar
OE NO.3E-1906 101-1759 3E1906 1011759 SANDEN: 4604 U4604 8064 4656 4468 7984
QUALITYGRADE ONE
Unit PriceUS $ 60-120 / set
Download DOCpdf icon
Update TimeApr 19,2024
Detail Information

Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee. 

 

SANDEN 7H15 SD7H15 SD7H15HD for Caterpillar ac COMPRESSOR

 

 3E-1906 101-1759 3E1906 1011759 SANDEN: 4604 U4604 8064 4656 4468 7984 SANDEN 7H15 SD7H15 SD7H15HD auto aircon ac compressor


 

Specification:

Model number: INTL-C142A

Car name for: Caterpillar

Compressor Type: SD7H15 SD7H15HD

Clutch DIA: 138mm

Grooves: 1pk 

Volt: 24V 

 

Special Notes:

 

OEM#

3E-1906

101-1759

3E1906

1011759

SANDEN:

4604

U4604

8064

4656

4468

7984

 

 

Details

 

COMPRESSOR for Caterpillar

 

 

3E-1906 101-1759 3E1906 1011759 SANDEN: 4604 U4604 8064 4656 4468 7984 SANDEN 7H15 SD7H15 SD7H15HD auto aircon ac compressor

Basic Requirements when servicing an A/C system:

 

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

 

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

 

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

 

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

 

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

 

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced

 

Please send your message to us
*Email
*Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.