Home / All / Auto Compressors / Caterpillar compressor /

183-5106 1835106 Sanden: 4840 4302 SANDEN 7H15 709 SD7H15 SD7H15SHD auto air conditioner ac compressor 8pk 152mm pulley

Categories

183-5106 1835106 Sanden: 4840 4302 SANDEN 7H15 709 SD7H15 SD7H15SHD auto air conditioner ac compressor 8pk 152mm pulley

183-5106 1835106 Sanden: 4840 4302 SANDEN 7H15 709 SD7H15 SD7H15SHD auto air conditioner ac compressor 8pk 152mm pulley
CategoriesCaterpillar compressor
BrandINTL Auto Air Conditioning Compressor
ModelINTL-C159A
SizePACKING:28*25*20
TypeCompressor
Car MakeSANDEN 7H15 709 SD7H15 SD7H15SHD for Caterpillar
OE NO.183-5106 1835106 Sanden: 4840 4302
QUALITY1 GRADE
Unit PriceUS $ 60-120 / set
Download DOCpdf icon
Update TimeMar 29,2024
Detail Information

Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee. 

SANDEN 7H15 709 SD7H15 SD7H15SHD ac compressor for Caterpillar

 183-5106 1835106 Sanden: 4840 4302 SANDEN 7H15 709 SD7H15 SD7H15SHD auto air conditioner ac compressor 8pk 152mm pulley

  

 

Specification:

Model number: INTL-C159A

Car name: for Caterpillar

Type: SANDEN 7H15 709 SD7H15 SD7H15SHD

Grooves: 8PK

clutch DIA: 152mm

Voltage: 24V

 

Special Notes:

OEM: 

183-5106

1835106

 

Sanden:

4840

4302

 

Can be used for:

 

Can used for Caterpillar 


 

 

183-5106 1835106 Sanden: 4840 4302 SANDEN 7H15 709 SD7H15 SD7H15SHD auto air conditioner ac compressor 8pk 152mm pulley

 

Basic Requirements when servicing an A/C system:

 

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

 

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

 

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

 

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

 

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

 

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced

Please send your message to us
*Email
*Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.