Home / All / Auto Compressors / Volkswagen compressor /

DENSO 10P15/10P15C 17250E 81530E 7 ears auto air con ac compressor for Volkswagen VW Truck

Categories

DENSO 10P15/10P15C 17250E 81530E 7 ears auto air con ac compressor for Volkswagen VW Truck

DENSO 10P15/10P15C 17250E 81530E 7 ears auto air con ac compressor for Volkswagen VW Truck
CategoriesVolkswagen compressor
BrandINTL Auto Air Conditioning Compressor
ModelINTL-2024
SizePACKING:28*25*20
TypeCompressor
Car MakeDENSO 10P15/10P15C for Volkswagen VW Truck
OE NO.17250E 81530E
QUALITY1 GRADE
OEM17250E 81530E
Unit PriceUS $ 50-120 / set
Download DOCpdf icon
Update TimeMar 29,2024
Detail Information

Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee. 

 

DENSO 10P15/10P15C for Volkswagen VW Truck ac compressor

  DENSO 10P15/10P15C 17250E 81530E 7 ears auto air con ac compressor for Volkswagen VW Truck

 

 

Specification:

Model number: INTL-2024

Car name: for VW VOLKSWAGEN 

Compressor type: DENSO 10P15/10P15C

Grooves: 8PK 120mm  7 EARS 

Voltage: 12V

 

 

Special Notes:

OEM NO.:

17250E

81530E 

Details

Suited for: 

 

DENSO 10P15 (8980) 18310 24V VW 

10P15 for VW Truck

 
  DENSO 10P15/10P15C 17250E 81530E 7 ears auto air con ac compressor for Volkswagen VW Truck

 

Packaging & Shipping

Packaging Detail

DENSO 10P15/10P15C 17250E 81530E 7 ears auto air con ac compressor for Volkswagen VW Truck

 

Shipping Detail

DENSO 10P15/10P15C 17250E 81530E 7 ears auto air con ac compressor for Volkswagen VW Truck

 

Our Factory

DENSO 10P15/10P15C 17250E 81530E 7 ears auto air con ac compressor for Volkswagen VW Truck

 

 

Basic Requirements when servicing an A/C system:

 

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

 

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

 

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

 

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

 

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

 

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced

Please send your message to us
*Email
*Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.