Home / All / Auto Compressors / Sanden 5 series compressor /

Sanden 5H14 508 SD5H14 SD508 CO 4508C SD5H14 4508 6656 7511578 UNIVERSAL AUTO air conditioning ac compressor 10pk pulley

Categories

Sanden 5H14 508 SD5H14 SD508 CO 4508C SD5H14 4508 6656 7511578 UNIVERSAL AUTO air conditioning ac compressor 10pk pulley

Sanden 5H14 508 SD5H14 SD508 CO 4508C SD5H14 4508 6656 7511578 UNIVERSAL AUTO air conditioning ac compressor 10pk pulley
CategoriesSanden 5 series compressor
BrandINTL Auto Air Conditioning Compressor
ModelINTL-C004A
Sizepacking:25*23*18
TypeCompressor
Car MakeUniversal
OE NO.Sanden 5H14 508 SD5H14 SD508 CO 4508C SD5H14 4508 6656 7511578
QUALITYHIGH
Unit PriceUS $ 37-46 / piece
Download DOCpdf icon
Update TimeMar 29,2024
Detail Information

Our factory can offer the all SANDEN compressors. and we also can produce as our clients demand. We promise the all compressor are brand new, and 1 year quality warranty.

 

Sanden 5H14 508 SD5H14 SD508 6656 125mm PV10 auto ac compressor

 

Sanden 5H14 508 SD5H14 SD508 CO 4508C SD5H14 4508 6656 7511578 UNIVERSAL AUTO air conditioning ac compressor 10pk pulley

 

Specification:

Model No.: INTL-C004A

OEM NO.:

CO 4508C

SD5H14

4508

6656 

7511578

Compressor Family:SD508
Style:STD
Mount Type:Ear 8 Long
Ear ID:83.3
Refrigerant:R12/R134A
Displacement:131.00
Rotation Direction:CW
Oil Qty (cc):175
Cylinder Head:FG
Port Angle:V
Port Clocking:12:00
Head Port Style:3/4X7/8
Rotor Size:125
Rotor Groove:PV10
Gauge Line
to First Groove:
18.76
Gauge Line
to Middle Groove:
34.78
Gauge Line
to End Groove:
50.80
Coil Voltage:12
Connector:1 Wire Male Bullet
Schematic:CLICK HERE
Service Manual:CLICK HERE

 

We are the professional auto air conditioner parts supplier located in Guangzhou, China.

If you have any confuse, we will be obliged if you kindly let us know. 

 

Basic Requirements when servicing an A/C system:

 

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

 

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

 

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

 

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

 

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

 

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced

Please send your message to us
*Email
*Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.