Home / All / Auto Compressors / Fiat compressor /

Auto ac compressor V5 for FIAT LANCIA 1995- #46525369

Categories

Auto ac compressor V5 for FIAT LANCIA 1995- #46525369

Auto ac compressor V5 for FIAT LANCIA 1995- #46525369
CategoriesFiat compressor
BrandINTL Auto Air Conditioning Compressor
ModelINTL-0543
SizePACKING:28*25*20
TypeCompressor
Car MakeV5 for FIAT LANCIA
OE NO.46525369 , 55192057 , 1135296
QUALITY1 GRADE
GROOVES4PK
Unit PriceUS $ 50-120 / set
Download DOCpdf icon
Update TimeApr 24,2024
Detail Information

Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee. 

 

Auto ac compressor V5 for  FIAT  LANCIA 1995-

 

 Auto ac compressor V5 for FIAT LANCIA 1995- #46525369

 

Specification:

Model number: INTL-0543

Car name: FIAT  LANCIA

Compressor type: V5

Year Model: 1995-

Pulley DIA: 119mm 

Grooves: 4PK 

Voltage: 12V

 

Special Notes:

OEM:

46525369

55192057

1135296

FIAT :

46525369

FIAT / LANCIA:

55192057

GM DELPHI :

1135296

GENERAL MOTORS:

1135296

 

Details

CAN BE USED FOR :
1995-2001 FIAT BRAVA (182) 1.6 16V 

1996-2000 FIAT MAREA (185) 1.6 16V

1996- FIAT MAREA WEEKEND (185) 1.6 16V

1999-2005 FIAT MULTIPLA (186 ) 1.6 16V 

1999- LANCIA LYBRA (839AX) 1.6 16V

1999- LANCIA LYBRA SW ( 839BX ) 1.6 16V

 

Basic Requirements when servicing an A/C system:

 

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

 

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

 

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

 

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

 

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

 

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced

 

Please send your message to us
*Email
*Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.