Home / All / Auto Compressors / Audi compressor /

Zexel DCW17 car a c compressor used for AUDI A6 1.8L AUDI 80 1994-- 4A0260805AK 8A0260805AK 8D0260805AG 8D0260805AK 506031-0891 (compressor supplier)

Categories

Zexel DCW17 car a c compressor used for AUDI A6 1.8L AUDI 80 1994-- 4A0260805AK 8A0260805AK 8D0260805AG 8D0260805AK 506031-0891 (compressor supplier)

Zexel DCW17 car a c compressor used for AUDI A6 1.8L AUDI 80 1994-- 4A0260805AK 8A0260805AK 8D0260805AG 8D0260805AK 506031-0891 (compressor supplier)
CategoriesAudi compressor
BrandINTL Auto Air Conditioning Compressor
ModelINTL-XZC041
Size28*25*20CM
TypeCompressor
Car MakeAUDI A6 1.8L 80 1994-97
OE NO.4A0260805AK 8A0260805AK 8D0260805AG 8D0260805AK 506031-0891/0771
COMPRESSOR TYPEDCW17D
Clutch Diameter123MM
NUMBER of GROOVE4PK
ConditionBrand new
original manufacturerZexel
Car year1994-1997
FOB portGuangzhou
Terms of PaymentL/C, T/T, Western Union
Download DOCpdf icon
Update TimeApr 19,2024
Detail Information

Download the PDF Document at hereINTL-XZC041INTL-XZC041


Zexel DCW17 DCW17D ac compressor for AUDI 4pk

 

 

Specifications:


Model number:  INTL-XZC041 
COMPRESSOR TYPE:  Zexel DCW17 DCW17D
NUMBER of GROOVE: 4PK
Clutch Diameter.: 123MM
Voltage: 12V
Car Makes.: AUDI
Car year:  1994-1997

 

OEM number:

4A0260805AK 

8A0260805AK

8D0260805AG 

8D0260805AK

Original No. 

506031-0891

506031-0771       

506231-0491    

5060310891

5060310771       

5062310491    

 

Applications/Vehicles:

AUDI A6 1.8L 1994-97

Audi 80 1987-1992


air conditioning a/c compressor for Audi A6 1.8L AUDI 80
AUDI 4A0260805AK 8A0260805AK8D0260805AG 8D0260805AK

COMP AUDI A6 1.8L 1994-97 DCW17D 4A0260805AK 4A0260805AG



Basic Requirements when servicing an A/C system:

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well


2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.


3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.


4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.


5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.


6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced


Please send your message to us
*Email
*Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.