Home > Auto Compressors > Hyundai compressor >

HS18 / HS-18 ac compressor Hyundai H-1 PV1 97701-4A071 97701-4A300 97701-4A370 977014A071 977014A300 97610-H1002 97610-H1003

Categories

HS18 / HS-18 ac compressor Hyundai H-1 PV1 97701-4A071 97701-4A300 97701-4A370 977014A071 977014A300 97610-H1002 97610-H1003

HS18 / HS-18 ac compressor Hyundai H-1 PV1 97701-4A071 97701-4A300 97701-4A370 977014A071 977014A300 97610-H1002 97610-H1003
HS18 / HS-18 ac compressor Hyundai H-1 PV1 97701-4A071 97701-4A300 97701-4A370 977014A071 977014A300 97610-H1002 97610-H1003
CategoriesHyundai compressor
BrandINTL Auto Air Conditioning Compressor
ModelINTL-0307
SizePacking: 25*20*18
TypeCompressor
Car MakeHS18 / HS-18 Hyundai H-1
OE NO.97701-4A071 97701-4A300 97701-4A370 977014A021 977014A071 97610-H1002
QUALITYHIGH
Unit PriceUS $80-120 / set
Download DOC
Update Time07-24-2017
Detail Information

Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee.  

 

HS18 / HS-18 ac compressor for Hyundai H-1

 

HS18 / HS-18 ac compressor Hyundai H-1 PV1 97701-4A071 97701-4A300 97701-4A370 977014A071 977014A300 97610-H1002 97610-H1003

Specification:

Model number: INTL-0307

Car name: Hyundai

Year model: 

Type:HS18 / HS-18

Grooves: 1GA

Clutch DIA:135mm

Voltage: 12V

 Manufacturer Restriction: Halla 
New Part 
Number of Ribs: 1  (GROOVE:1PK)
Oil Fill Quantity: 240 ml 
Port Type: PAD 
Pulleys: with belt pulley 
Voltage: 12 V 
 Hyundai H-1

 

Special Notes:

OEM:
97610-H1002
97610-H1003
97610H1002
97610H1003
97701-4A021
97701-4A071
97701-4A300
97701-4A370
977014A021
977014A071
977014A300
977014A370
  

 

 

Basic Requirements when servicing an A/C system:

 

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

 

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

 

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

 

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

 

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

 

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced

Please send your message to us
*We will reply your inquiry to this Email as soon as we see it
E-mail
 
/
Title
Content

Agree to use terms of service