Home > Auto Compressors > Hyundai compressor >

China supply Auto ac (a/c) compressor HS20 for Hyundai H-1 Cargo 2.5 CRDI 2008-2014 oem#97701-4H010

Categories

China supply Auto ac (a/c) compressor HS20 for Hyundai H-1 Cargo 2.5 CRDI 2008-2014 oem#97701-4H010

China supply Auto ac (a/c) compressor HS20 for Hyundai  H-1 Cargo 2.5 CRDI 2008-2014  oem#97701-4H010
China supply Auto ac (a/c) compressor HS20 for Hyundai  H-1 Cargo 2.5 CRDI 2008-2014  oem#97701-4H010
  • Price
  • US$ 80-90/set
  • Model
  • INTL-XZC367
  • Unit Price
  • Order QuantityUnit PriceDelivery period
    1 - 4US$ 90/set5 day
    5 - 10000US$ 80/set10 day
  • Quantity
  • set
Detail Information

Our factory can produce many kinds of auto air Compressor with good quality and one year quality warrantee.


INTL-XZC367INTL-XZC367



Auto ac (a/c) compressor HS20 for Hyundai/Kia - GRAND STAREX

INTL NO.INTL-XZC367
Compressor TypeHS20




Hyundai/Kia - GRAND STAREX





OEM NO.:

977014H010

97701-4H010





More products, you can look through our website: www.intl2008.com


Packaging Detail

Shipping Detail

Our Factory

Basic Requirements when servicing an A/C system:



1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well


2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.


3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.


4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.


5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.


6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced





Please send your message to us
*We will reply your inquiry to this Email as soon as we see it
E-mail
 
/
Title
Content

Agree to use terms of service