Home > Auto Compressors > Buick compressor >

88892650 88897596 ac compressor for Buick Rendezvous/Chevrolet Venture/Oldsmobile Silhouette /Pontiac Aztek/Pontiac Montana 6pk

Categories

88892650 88897596 ac compressor for Buick Rendezvous/Chevrolet Venture/Oldsmobile Silhouette /Pontiac Aztek/Pontiac Montana 6pk

88892650 88897596 ac compressor for Buick Rendezvous/Chevrolet Venture/Oldsmobile Silhouette /Pontiac Aztek/Pontiac Montana 6pk
88892650 88897596 ac compressor for Buick Rendezvous/Chevrolet Venture/Oldsmobile Silhouette /Pontiac Aztek/Pontiac Montana 6pk
  • Price
  • US$ 80-90/set
  • Model
  • INTL-XZC339
  • Unit Price
  • Order QuantityUnit PriceDelivery period
    1 - 4US$ 90/set5 day
    5 - 10000US$ 80/set10 day
  • Quantity
  • set
Detail Information

INTL-XZC339INTL-XZC339Our factory can produce many kinds of auto air Compressor with good quality and one year quality warrantee.



ac compressor for Buick Rendezvous/Chevrolet Venture/Oldsmobile Silhouette /Pontiac Aztek/Pontiac Montana 6pk




 



Specification:

Model number : INTL-XZC339
Type: MSC105CVSG4
Pulley: 6pk
Clutch DIA: 95mm
Volt: 12V



Special Notes:

OEM#

88892650
88897596
AKH200A405
AKH200A409A
AKH200A406

ACDelco:
15-20744
CarQuest / NAPA:
254355
Delphi:
CS10049
Four Seasons:
67474
68474
General Motors:
10308116
10316924
10322840
10413214
88892650
88897596
Proliance:
1472
1472N



Fit the following vehicles:

2002-2005 for Buick Rendezvous V6 3.4
2001-2004 for Chevrolet Venture V6 3.4
2005 for Chevrolet Venture LS/LT/Plus V6 3.4
2001-2003 for Oldsmobile Silhouette V6 3.4
2001-2005 for Pontiac Aztek V6 3.4
2001-2005 for Pontiac Montana V6 3.4





Packaging Detail

Shipping Detail

Our Factory


Basic Requirements when servicing an A/C system:


1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well



2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.



3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.



4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.



5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.



6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced






Please send your message to us
*We will reply your inquiry to this Email as soon as we see it
E-mail
 
/
Title
Content

Agree to use terms of service