Home > Auto Compressors > Toyota compressor >

DENSO 10S11C auto ac air conditioning compressor FOR TOYOTA VIOS

Categories

DENSO 10S11C auto ac air conditioning compressor FOR TOYOTA VIOS

DENSO 10S11C auto ac air conditioning compressor FOR TOYOTA VIOS
DENSO 10S11C auto ac air conditioning compressor FOR TOYOTA VIOS
CategoriesToyota compressor
BrandINTL Auto Air Conditioning Compressor
ModelINTL-0201
SizePACKING:25*20*18
TypeCompressor
Car MakeTOYOTA VIOS 10S11C
OE NO.TOYOTA VIOS 10S11C
QUALITY1GRADE
GROOVES4PK
CLUTH DIA110mm
Download DOC
Update Time11-22-2017
Detail Information

Our factory can produce many kinds of Air Conditioner Compressors(auto compressor ) with good quality and one year quality warranty.


 10S11C auto compressor for Toyota Vios

DENSO 10S11C auto ac air conditioning compressor FOR TOYOTA VIOS

Specification:

Model NO.:INTL-0201               

Car name: Toyota Vios

Compressor Type: 10S11C

Pulley Grooves:4PK              

Refrigerant:R-134a
Pulley DIA: 110 mm
Voltage12V

OEM#

88320-0D020
88320 0D020
883200D020
88320-8C000
883208C000

Application for:
Toyota Vios
TOYOTA CAMRY ACV31 Year  2004-


Special Notes:

Compressor model INTL-0201, INTL-0202,  INTL-0203,  INTL0102019 NEARLY SAME, JUST THE PULLEY DIA IS DIFFERENT.

Basic Requirements when servicing an A/C system:

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced


Please send your message to us
*We will reply your inquiry to this Email as soon as we see it
E-mail
 
/
Title
Content

Agree to use terms of service